Help:Dumping games

Revision as of 12:44, 24 June 2024 by LordBubbles (talk | contribs) (Fix image position)

In order to get a copy of the content files and executable, you will need to dump Breath of the Wild from a console. This article provides instructions for Wii U and Switch users.

Wii U

The easiest method for dumping BOTW in a manner compatible with tools like Cemu and BCML is to use Dumpling.

Prerequisites

  • BOTW 1.5.0 on your Wii U
  • Any Wii U (Method 1)
  • Modded Wii U with Homebrew Launcher (Method 2)

Dumping your game files

Method 1 (Any Wii U) - Website

  1. Insert an SD card into your Wii U.
  2. Before running Dumpling, disable auto power off and standby on your Wii U.
  3. Insert any USB devices or game discs you’d like to use in the dump process.
  4. Launch the Internet Browser app.
  5. Go to https://dumplingapp.com/
  6. Select "Dump digital games" or "Dump a game disc" as appropriate.
  7. Select BOTW using the (A) button and then press (START) (selection N/A if using a disc). Make sure to check the boxes for base game, update, and (if applicable) DLC.
  8. Set the dump destination.
  9. Select (START) to begin dumping (which can take a very long time).
  10. Once finished, you can put the SD card into your PC and copy the files onto your hard drive.

Method 2 (Modded Wii U only) - Homebrew App

  1. Download the latest release of Dumpling from here.
  2. Extract the ZIP to the root of your SD card.
  3. Before running Dumpling, disable auto power off and standby on your Wii U.
  4. Insert any USB devices or game discs you’d like to use in the dump process.
  5. Open Dumpling from the Homebrew Launcher.
  6. Select "Dump digital games" or "Dump a game disc" as appropriate.
  7. Select BOTW using the (A) button and then press (START) (selection N/A if using a disc). Make sure to check the boxes for base game, update, and (if applicable) DLC.
  8. Set the dump destination.
  9. Select (START) to begin dumping (which can take a very long time).
  10. Once finished, you can put the SD card into your PC and copy the files onto your hard drive.

Switch

Dump the game files directly to your PC using nxdumptool. Update data can only be processed if the base game is available, because they share the same filesystem. DLCs don't, so they have to be dumped separately.

Warning: If you misbehave (piracy, online cheating or anything equally stupid), you might get banned from Nintendo online services. If you do not want to leave any traces, turn on airplane mode, back up your eMMC before running any homebrew and do not ever go online before you have restored the backup.

If you already have the game setup on a Switch emulator, you do not need to follow any of the steps with nxdumptool on your Switch. Right click the game in your emulator and:

  • Extract data > Dump RomFS (Ryujinx)
  • Dump RomFS > Dump RomFS > Full (Yuzu)

Prerequisites

  • Keys file generated using Lockpick_RCM, located at sdmc:/switch/prod.keys. Run the payload on your console through RCM in order to dump the keys needed by nxdumptool to decrypt contents.
  • nxdumptool rewrite (join the discord server linked on the description of this release to get the PC host app in #pre-build-files).
  • Zadig to setup the driver for dumping through USB

Dumping game files

  • First, make sure to dump your keys by injecting the Lockpick_RCM payload and selecting "Dump title keys".
  • Then, reboot to Atmosphère, open nxdumptool rewrite (nxdt_rw_poc), and plug the Switch to your computer with a USB cable.
  • With nxdumptool open, launch Zadig on your computer, and follow the driver installation instructions below
    1. Go to Options and make sure List all devices is checked -- if not, click that option.
    2. Using the dropdown list with USB devices, select the name of the NRO you launched on your Switch (e.g. nxdt_rw_poc).
    3. Change the Driver dropdown on the right to libusbK (the actual version number doesn't matter).
    4. Wait until the installation process finishes. If you did it correctly, Zadig should look like this:

 

  • Open the host app downloaded from #pre-build-files in the official nxdumptool discord server, and click Start Server (if the Switch is not detected, it means you probably didn't setup the driver properly).
  • On nxdumptool, navigate through the menu by selecting the following options:
    1. Go to user titles menu, then select The Legend of Zelda: Breath of the Wild
    2. Select the following options: nca / nca fs dump options -> dump base application -> Program #0 -> FS section #2: RomFS
    3. On the line with use base/patch title: select the installed update
    4. On the line with output storage: select usb host (pc)
    5. Select start nca fs section dump
Depending on your USB speed (2.0 or 3.0) and the quality of your cable, it may vary from 10 minutes up to an hour.
It may fail if your USB cable is faulty, or if you run out of space on your computer (requires at least 14GB of available storage).

Just like it was previously mentioned, updates share their filesystem data with the base game, so dumping the RomFS with an update is equivalent to dumping the whole filesystem from the updated game data. In other words, it isn't necessary to dump the base game filesystem and update separately.

DLCs, on the other hand, must be dumped separately.

If you have the DLCs installed, once the dump of the base application and update was completed, repeat previous steps from 1 to 5 again, but select dump dlc instead of dump base application on step 2.

  1. Updates are tagged as (UPD), and they use 01007EF00011E800 as their ID. v786432 (0.0.12.0) corresponds to BotW v1.6.0 update.
  2. DLCs are tagged as (DLC). 01007EF00011F001 and 01007EF00011F002 are the known IDs for the existent BotW DLCs.

When you're done, you'll be able to find the output dumps under NCA FS\Extracted in the nxdumptool host app folder.

Dumping binaries (executable files)

Executables in Switch titles are stored in a different section known as the ExeFS, which is only available in base games and updates. Unlike RomFS data, ExeFS data isn't shared between the update and its base game.

These files can also be dumped using nxdumptool.

  • On your Switch, open nxdumptool. Afterwards:
    1. If you have the gamecard: Select Dump gamecard content.
    2. If you have the eShop version: Select Dump SD card / eMMC content, then select BotW.
  • Select ExeFS options.
  • Highlight the Use update option and use the left/right buttons to cycle through the available updates for the game.
    1. If you have no available updates, this option won't appear. You'll only be able to dump the binaries from the non-updated base game (which is the same to just leaving this option set to No).
    2. Updates use 01007EF00011E800 as their ID. v786432 corresponds to BotW v1.6.0 update.
  • Select ExeFS section data dump and wait for the process to finish. This will dump the binaries from the selected update to the inserted SD card.

When you're done, you'll be able to find the output dump in sdmc:/switch/nxdumptool/ExeFS.